WT83 - High Capacitance wet tantalum
With 470µf @100V in a D size, WT 83 is a pass to miniaturize your impactful miniaturization of existing or new designs!
Capacitance values have been strongly increased with Exxelia's new range of tantalum capacitors:
- WT83 is an extension of the ST79 families (according to CLR93 MIL values) but with double the capacitance. That is a pass for impactful miniaturization of existing designs by playing on both size and weight (for instance, WT83 offers 470µf 100V in a D size, whereas ST79 only gives 220µF in the same other conditions).
Introduction of DSCC 93026 qualified Wet Tantalum Capacitors
Exxelia’s range of wet tantalum capacitors WT84 is now fully qualified to DSCC 93026 drawing for voltages from 25V up to 125V. Available in all case sizes (T1, T2, T3, T4) the family is housed in a hermetically sealed tantalum case and is designed to withstand the most stringent environmental constraints. Thanks to the continuous improvements conducted in the manufacturing processes combined with the high purity tantalum powder used by Exxelia, DSCC 93026 provides the highest capacitance per unit volume. In addition, compared to conventional wet tantalum capacitors, DSCC 93026 features much lower ESR and higher ripple current. DSCC 93026 is qualified for capacitance values range from 10µF up to 1800µF at voltages from 25V up to 125V, and with operating temperatures of -55°C to 125°C. The series is ideal for use in high-reliability defense, avionics, radars and power supply applications requiring high capacitance or high energy storage. DSCC 93026 is available now for order.
Innovative new products at Electronica - Booth# B5 312 -
Felsic HV, long lifetime and high voltage screw terminal The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density and ultra-long lifetime. For example products can withstand 8 000 hours at 105°C under high values of current which makes them the perfect choice to overcome railway constraints. The family also has one of the lowest ESR for aluminum capacitors, less than 10m0hms in most cases. Products are available for voltages from 160 to 450 Vdc, and offer capacitance values from 1500μF up to 47 000μF. Thus the family is a good compromise between reliability and compacity, with for example 47 000μF @ 160V in a 90x200mm volume. Cost-effective common-mode chokes qualified for aerospace Designed and qualified for aerospace, the TCM series is available in a through-hole package for horizontal and vertical mounting. TCM common-mode chokes are offered with inductances from 0.7 to 47mH under rated currents from 0.3A to 4A, and thoroughly tested by a dielectric withstanding strength at 1500VAC. Their excellent thermal properties allow the TCMs to operate without a hitch from -55°C up to +125°C, which, combined to the high mechanical resistance of the chosen materials (all meeting to UL94 V0 rating) make those products the perfect fit for aviation, defense and transportation industries. Ceramic capacitors based on the new C48X dielectric New range of high voltage ceramic capacitors based on brand new dielectric material C48X, combining most advantages of NPO and X7R dielectrics. Compared to X7R material, C48X dielectric allows to get the same capacitance values under working voltage with the unrivaled advantage of a very low dissipation factor (less than 5.10-4). Besides, it can also withstand very high dV/dt, up to 10kV/μs, which makes it the solution of choice for pulse and fast charge/discharge applications or firing units. Thus capacitors with C48X dielectric appear to be ideally suited for power applications where heat dissipation may be detrimental to performances and reliability. Ultra low ESR, high RF power and high self-resonant frequency The new NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0.3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment.