Space & Military Grade Passives at CMSE - booth # B13 -
Exxelia will be showcasing Military and Space-qualified passive components (ESA QPL, MIL, DSCC, etc.) at the 2018 Components for Military and Space Electronics conference (CMSE) - booth# 13 - at the Sheraton Four Point Hotel in Los Angeles on May 7-10, 2018.
CMSE is one of the most recognized conference dedicated to the use of component in military and space systems. As a key supplier of highly reliable passive components, Exxelia will be displaying in booth B13, a wide variety of military and space-qualified capacitors (ceramic, tantalum, film, electrolytic aluminum), wound magnetics solutions and EMI/RFI filters.
Two new ranges of MIL-qualified tantalum capacitors: MIL39006/22 & MIL39006/25
The recently introduced ranges of MIL-qualified tantalum capacitors will be showcased on the company booth (B13). MIL 39006/22 and MIL 39006/25 respectively equivalent to CLR79 and CLR81 types feature hermetically sealed cylindrical tantalum cases and axial leads are available in T1, T2 T3 and T4 cases with extended capacitance and voltage ratings. MIL 39006/22 is qualified for voltages from 6V to 125V and provides from 1200µF @ 6V to 56 µF @ 125V. MIL 39006/25 is qualified for voltages from 25V to 125V and delivers from 680µF @ 25V to 82 µF @ 125V. Both ranges combine high energy density with a large operating temperature range of -55°C - +125°C and H vibrations and shocks resistance.
Alsic 20G, Aluminum Electrolytic capacitors with large operating temperatures
Alsic 20G is a range of radial leaded aluminum electrolytic capacitors for typical use in military and aerospace high frequency switch-mode power supplies requiring advanced performance under all operating conditions. Alsic 20G operational rated life is 8,000 hours at rated voltage and 105°C, and provides from 330µF @ 500V to 80 000μF @16V. The range features ruggedized design with insulating aluminum case and tin coated leads. With capacitance stability at high temperature, low inductance and impedance, competitive ESR and high ripple current, these capacitors are perfectly adapted for mission-critical applications.
C48X dielectric: NPO and X7R advantages combined
Under working voltage, C48X dielectric provides equivalent capacitance values to an X7R material with the advantage of a very low dissipation factor (less than 5.10-4). It can also withstand very high dV/dt, up to 10kV/µs which makes it perfect for pulse and charge/discharge applications for firing units. Exxelia’s C48X capacitors, available from 200V to 5kV with EIA sizes from 1812 to 16080, are ideally suited for power applications where heat dissipation may be detrimental to performances and reliability, such as 400Hz Aircraft, Ignition systems, and Space, or as Precision/filtering capacitance in thermally challenged environment for AC or DC voltage.
QPL CERTIFICATION for PM907S & PM948S SERIES OF FILM CAPACITORS
Series PM907S and PM948S of Film capacitors obtained the QPL certification from the European Space Components Coordination (ESCC). According to the ESCC Detail Specification No. 3006/025 and 3006/026 QPL certified products ensure superior performances, quality and reliability intended for use by the European Space Agency (ESA) and in Space in general. PM907S and PM948S are full series of Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used with a voltages from 50V up to 630V with capacitance values from 22nF up to 47μF. Both series can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current. Products are typically being used in SMPS (Switch Mode Power Suppliers) and BUS filtering. These two certified series complete the list of Exxelia Group’s QPL certified film capacitors, that now includes: – PM90S – PM907S – PM96S (T) – PM94S – PM948S – MKT5 – KM111S – KM94S
Exxelia acquires Deyoung MFG., INC.
“The DMI acquisition directly supports our Magnetics SBU expansion strategy. DMI’s strategic location in the Pacific Northwest aerospace market provides a key geographic location for driving growth and profitability,” said François Vignaud, Exxelia Magnetics’ SBU VP. “DMI is highly regarded for the quality of its products and the operational performance of its organization. DMI products can be found on most major commercial aerospace platforms, supporting in flight power, lighting and entertainment sub-systems.” “We welcome DMI into the Exxelia Group,” said Exxelia USA President Michael Thomas. “During its 40-plus years in business, DMI has built solid customer relationships with a strong brand reputation in the aerospace, medical and other high-reliability magnetics markets. Acquiring DMI creates the potential for both revenue and cost synergies related to cross selling and procurement savings as we leverage Exxelia Group’s broader global supply chain and operational excellence practices to support DMI’s operations.” According to Martin DeYoung, President & CEO of DMI, “We are excited to now be a part of Exxelia’s growth and expanded product offerings. The DeYoung’s recognized a shared business culture driven by a passion for quality and customer loyalty. By joining Exxelia Group we achieve a goal of meeting our strategic growth objectives while protecting our long standing relationships with our key aerospace customers and their contract manufacturers.” “This acquisition addresses our aerospace customers increasing requirements for global manufacturing access and timely support” stated Eric DeYoung, VP of Operations at DMI. “Together, we have global reach with the capability to serve our customers – whatever their size, location, or aerospace industry sector with one of the most comprehensive and competitive groups of design and manufacturing capabilities.”