Exxelia at EMV
Exxelia is pleased to exhibit at EMV 2019 in Stuttgart, Germany from March 19 to 21 inHall C2 Booth# 113, Exxelia will be introducing a new filter design conception.
Showcased at Exxelia’s booth #113 in Hall C2, will be Asymmetric filter solutions, the most optimized design in the market.
Smaller, lighter and consequently easier to install, Exxelia is the only manufacturer to solve HEMP requirements with Asymmetric filter designs, hence addressing the security challenges of tomorrow.
Exxelia pushes the limits of design with the new BDP series allowing a 50% space saving in your installation while keeping high technical specifications (insertion loss of 80dB, 1250A, 300kHz to 18GHz) and complying with the MIL STD 188 125 1&2 test requirements.
Asymmetric designs allow to combine safety and miniaturization while still handling HEMP and TEMPEST requirements. Three important benefits stand out from this conception, starting with a lower heat dissipation: as no magnetic field is generated, inductors suffer no heat dissipation. Secondly, the leakage is significantly lower thanks to a low value capacitance. Finally by using only one common inductor, these designs definitely save space.
Dr. Guillaume Aubard, Exxelia Filters’ Business Development Manager will be speaking at EMV Forum Hall C2-319 on March 20th from 3:40pm to 4pm about the Asymmetric filter solutions for HEMP and TEMPEST following by a Q&A.
Composants magnétiques innovants à l’APEC 2017 – stand 623 –
Magnetic Components based on Adaptive CCM Technology Exxelia designed CCM technology to respond to the growing interest of electronic engineers for inductors and transformers with multiple outputs, high power density and reduced footprint. Qualified for aeronautic and space applications, the CCM product line features terrific robustness. The monolithic design provides high mechanical performance, proven by the successfully testing in accordance with MIL-STD-202 (methods 213 and 204). The series offers five different sizes, allowing optimized component design in a pick-and-place surface mount (SMD) package. Through-hole (TH) packages are also available upon request. The CCM series is particularly flexible with a number of pins options available, from 2×6 pins for the smallest package, up to 2×10. CCM transformers and inductors can operate over a wide temperature range with a minimal temperature of -55° C. The standard thermal grade of the technology is 140° C. Thanks to the technology design, the thermal resistance is 30% lower than standard industrial components. The epoxy molding protecting the winding ensures a lower temperature gradient and a better heat dissipation. Each unit is thoroughly tested with a dielectric withstanding strength of 1,500 VAC. Component materials meet UL 94-V0 rating. Cost-effective Common-mode Chokes Qualified for Aerospace Exxelia designed this extensive and cost-effective range to be an easy commercial (COTS) solution for aerospace, defense, and other high-reliability applications. The TCM series is available in a through-hole package for horizontal or vertical mounting. TCM chokes are offered with inductances from 0.7 mH to 47 mH under rated currents from 0.3 to 4.0 A. Each unit is thoroughly tested with a dielectric withstanding strength of 1,500 VAC. Excellent thermal properties allow the series to operate from -55° C to +125° C. The high mechanical performance of the component materials (all meeting to UL94 V0 rating) makes TCM a perfect fit for aviation, defense and transportation industries.
Nouveau résonateur diélectrique, E7000
Operating frequencies in wireless communications have shifted towards high frequency band and thus frequencies higher than 1 Ghz are now commonly utilized. In addition, the microwave frequency spectrum becoming severely crowded and sub-divided into many different frequency bands, designers are systematically looking for resonators giving them a narrow bandwidth with smaller size. Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia Temex, daughter company of Exxelia Group, has developed with support of ESA and CNES, a new high-end dielectric material, E7000 series, designed for high-end filters where high Q factor is requested. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q factor and the possibility to get all the temperature coefficients upon request. E7000 provides high-performance requested for space use in the frequency range 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ. Typical applications: Satellite multiplexing filter devices, radio links for communication systems (LMDS), military radars.